Band Saw Machine
Feature
G4025
Turbo Transmission Gear
Horizontal rotation from 0-60 degree , contra rotation 45 degree
Adopt hydraulic cylinder to control feeding , protect saw band life
Two -speed motor

GB4250-GB42160
Feature:1.machine tools through mechanical, electrical, hydraulic coordination, with automatic clamping,automatic feeding, cutting finished, saw frame automatic rapid rise (ie retreat) function.
2. feed speed, within a given range, can be stepless adjustment.
3.The lifting and positioning of the saw frame is controlled by an ultraviolet proximity switch.
4.The length of feeding material is checked and fixed by grating ruler, and the grating ruler detects the effective range 500mm.

Aplication

automatic control system:
1.automatic control man-machine interface, through mechanical, electrical and hydraulic
coordination, with automatic feeding, automatic cutting system to control the work cycle.
2.in the operating system is divided into manual and automatic work, man-machine interface conversion control.
3.in the band saw machine is equipped with two sets of vice, a group used for sawing when clamping, automatic feeding by another set of vice clamp,through the oil tank work to control feeding. The feeding length is controlled by an ultraviolet tight travel switch.
4.by PLC programmable controller, set sawing automatic process of the whole process.
5.feeding length is controlled by grating ruler. It is accurate in positioning, high in accuracy and less than 0.50mm in length.
Specification
G 4025 Model

Column horizontal bandsaw(GB4250-160)
